Dual Flanged Pull Plugs - DFPP-SH SERIES
Purpose Dual Flanged Pull Plugs are designed to mask weld nuts and nuts; they will mask off the hole and the first and last thread of a threaded nut or hole. How the product is used The plug is applied by being pulled into the threaded hole of the nut or weld nut until both flanges rest against the faces of the weld nut. The plug is removed by pulling it through the hole. Recommended for Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range Maximum temperature 600°F (315°C) Design Features - Flanged - The two flanged areas mask off the first and last thread of a threaded nut or hole.
- Handle - The handle area above the flanged diameter helps with insertion and removal
- Sizes - This series offers sizes specifically designed for metric threaded holes
- Visible - The handle area above the flanged diameter makes the plug easier to see on the component
- Reusable - The plugs are reusable depending on the application
- Color coded - The Plugs are color coded to ease identification and sorting
- Identification - The Shercon name is on the plug
Storage conditions Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.
|