Ultrabake™ Dual Purpose Plugs

Back . . Next
Ultrabake™ Dual Purpose Plugs - UDPP-SH SERIES


Ultrabake™ Dual Purpose Plugs are designed to plug round or square, plain or threaded holes; they will mask off the hole and allow finishing up to it.

How the product is used

The hole can be a blind hole or a through hole.

The hole can be round or square. One side of this plug is round and the other side is square.

The plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the end that remains out of the hole.

Recommended for

Powder coating, E-coating, Plating, Anodizing, Spray painting

Temperature Range

Maximum temperature 600°F (315°C)

Design Features

  • Dual Purpose - One side is round, one side is square
  • Handle - The side that is not plugging the hole acts as a handle
  • Reusable - The plugs are reusable depending on the application
  • Color coded - The Plugs are color coded to ease identification and sorting
  • Identification - The Shercon name is on the plug

Storage conditions

Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.

Click to Move Diagram

To place an order:

1.    select unit of measure, color and quantity

2.    select either “Buy item” (to purchase) or “Sample” (for a free sample)

3.    Click red “Add to Cart” button to add your selected items to the shopping cart

4.    View Cart (top right) when ready to place your order and checkout.

Caplug NoStd. ColorABCDEFQty. Per BagUnit of MeasureColorQuantityAmountAdd to Cart Sample 
UDPP-SH-0625RUSTY RED0.750.5000.6250.750.5000.625250N/A
UDPP-SH-1000RUSTY RED1.000.8751.0001.000.8751.000100N/A
Caplug NoStd. ColorABCDEFQty. Per BagUnit of MeasureColorQuantityAmountAdd to Cart Sample 

Note:  After selecting items, you must click the red “Add to Cart” button for your items to be added to your shopping cart.

Production Capabilities / Find a Sales Representative / Tech Support / Material Certifications / Trade Shows / What's New / Certifications and Memberships / FAQ's / Site Map

Seeing from a Digital Vantage Point