Ultrabake™ Zerk Caps - ZC-SH SERIES
Purpose Zerk Caps are designed specifically to mask Zerk fittings; they will mask off the fitting and allow finishing up to it. How the product is used The cap is applied by being pushed over the fitting. It is removed by being pulled off. Zerk Caps are available in two styles: one with a short handle and another with an extended handle, which eases installation and facilitates removal from hard-to-reach spaces Zerk fittings, also sometimes called Alemite fittings, Grease fittings or Lincoln fittings, are commonly found in the Automotive, Agricultural, and Heavy Equipment industries. Recommended for Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range Maximum temperature 600°F (315°C) Design Features - Design - Specifically designed for masking Zerk fittings
- Tight Fit - Caps are designed to be a tight fit on the fitting
- Handle - The handle makes the cap faster to install and remove
- Lengths - long and short lengths are available
- Visible - The handle makes the cap easier to see on the component
- Reusable - The caps are reusable depending on the application
- Color coded - The caps are color coded to ease identification and sorting
- Identification - The Shercon name is on the cap
Storage conditions Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.
|