Ultrabake™ Caps - SC-SH SERIES
PurposeUltrabake™ Caps are designed to mask plain and threaded studs, tube ends and even slotted holes; they will mask off the stud and allow finishing up to it. How the product is used The cap is applied by being pushed over the stud. It is removed by being pulled off. It can be used as a plug by being inserted into threaded or plain holes. However, on holes we would recommend a plug such as the UP series of plugs or the SPP series of pull plugs. If the cap is used as a plug it can be pushed into place using a rounded end rod or dowel. Recommended for Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range Maximum temperature 600°F (315°C) Design Features- Flexible - The cap is flexible so it can fit a range of different diameters and shapes
- Lengths - Many of the diameters are available in different lengths
- Reusable - The caps are reusable depending on the application
- Color coded - The caps are color coded to ease identification and sorting
- Identification - The Shercon name is on the cap
Storage conditions Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.
|
Click to Move Diagram
|