Hollow Ultrabake™ Plugs - HUP-SH SERIES
Purpose Hollow Ultrabake™ Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it. How the product is used The hole can be a blind hole or a through hole.
The plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the larger diameter. This range of plugs is hollowed out making them lighter. Recommended for Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range Maximum temperature 600°F (315°C) Design Features - Tapered - The plug is tapered and can be fitted into a range of different diameters
- Flexibility - The material is soft and conforming. This allows the plug to seal the hole
- Hollow - The plugs are hollow making them lighter and more conforming
- Tapered Hollow - The hollow section is tapered to ensure the plug does not trap liquid
- Reusable - The plugs are reusable depending on the application
- Color coded - The plugs are color coded to ease identification and sorting
- Identification - The Shercon name is on the plug
Storage conditions Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.
|